|
Machine Specifications
Maximum Bend Length: 49.21"
Press Capacity: 35 Tons (39 US Tons)
Vertical Stroke of Lower Beam: 3.937"
Rising Speed of Lower Beam (in. /sec) at 60Hz: 2.992"
Bending Speed of Lower Beam (in. /sec) at 60Hz: 0.520"
Lowering Speed of Lower Beam (in. /sec) at 60Hz: 1.575"
Number of Cylinders: 1
Hydraulic Unit Tank Capacity, (US Gal): 10
Machine Weight (US Tons): 2.0
Control Specifications
Numerical controls
Position Command Method: Absolute Value Method
Number of Controlled Axes: 2 Axes
Input Method
D axis: Teaching with HANDWHEEL, and data entry with numeric keys (MDI mode)
L axis: Data entry with numeric keys
Least Input Increment
D axis: 0.0004 in.
L axis: 0.001in.
Display Method: 7-segment LED
Position Detection
D axis: Encoder
L axis: Encoder
Memory Capacity: 99 steps in L-ONLY mode and 99 steps in MDI mode or 198 steps
in total
Drive Method
D axis: 200-W DC motor
L axis: 200-W DC motor
Origin Setup
D axis: Tool origin set by aligning tools
L axis: Origin automatically set ORIGIN START button
Alarm Display: Operational mistake and error are displayed by number
Ambient Temperature: 32 to 104 degrees F
Ambient Humidity: Maximum of 75% (relative humidity) without dew condensation
Backgauge Specifications
Feed Rate
D Axis: 0.01 to 0.60 in. /sec
L Axis: 590.55 in. /min
Travel Range
D Axis: 0 to 3.937 in.
L Axis: 0 to 19.685 in.
Stopper Height: 1.969 to 7.087 in.
Positioning Accuracy
D axis: +/- 0.0004 in.
L axis: +/- 0.0060 in.